Office Address

Frankfurt (Oder), Germany

Phone Number

+49 15510 479175

Email Address

info@cmcsmartfarm.com

Cheapest Ways to Add...

Cheapest Ways to Add Autosteer to an Older Tractor

Cheapest Ways to Add Autosteer to an Older Tractor

You don't need a brand-new tractor to get the benefits of GPS guidance. Autosteer can be added to most older machines, and the cost is far lower than many farmers expect. This guide covers the cheapest ways to add autosteer to an older tractor, what you can skip, and what's worth paying for.

Can you put autosteer on an old tractor?

Yes. As long as your tractor steers and has a 12V power supply, you can usually fit a GPS autosteer system, even on machines from well before guidance was built in. The trick is choosing a system that doesn't rely on factory wiring your tractor never had.

The cheapest route: an electric steering wheel

For older tractors, an electric steering wheel system is almost always the most affordable option. A motorised unit mounts on your existing steering column and turns the wheel for you, following GPS lines. There's no need to tap into the hydraulics or add factory steering electronics, which keeps both the hardware and the fitting simple. It also unbolts and moves to another tractor, so one kit can cover a mixed fleet, spreading the cost across machines.

Do you actually need RTK?

This is where a lot of budget is won or lost. RTK gives centimetre accuracy, but it costs more and needs a correction source (a base station or a network subscription). If your work is spraying, spreading, mowing or general cultivation, a lower-cost correction level is often accurate enough and far cheaper. Save RTK for repeatable jobs like planting, strip-till or controlled-traffic farming where every pass has to land in the same place. Matching the accuracy to the job is the single biggest way to keep the price down.

Where the cost really goes

  • Steering type — electric wheel is cheapest; hydraulic tie-ins cost more.
  • Accuracy level — basic correction is low-cost; RTK adds the most.
  • Correction source — a one-off base station vs an ongoing network (NTRIP) subscription.
  • Display — a simple guidance screen keeps things affordable; full farm-management displays cost more.

Buy for the work you do today. You can always add RTK or a base station later.

What to check before buying for an older tractor

  • Cab space for the steering unit and a clear spot for the display.
  • A clear view of the sky for the GNSS antenna.
  • 12V power that can run the system.
  • Your make, model and year so you can confirm the right mounting kit.

If you're unsure whether a system suits your machine, our autosteer compatibility guide and how to choose an autosteer system both walk through it.

Budget-friendly FJD options

CMC SmartFarm supplies FJD precision-farming equipment, priced in euros and shipped worldwide from Germany:

Quick checklist for a cheap autosteer setup

  • Choose an electric steering wheel to avoid hydraulic work.
  • Pick basic accuracy unless your job truly needs RTK.
  • Decide the correction source only if you go RTK.
  • Confirm cab space, antenna view and 12V power.
  • Match the mounting kit to your tractor's make, model and year.

Get those right and you can add real GPS guidance to an older tractor for a fraction of the cost of a new machine, and start saving on fuel, seed and overlap straight away.

whatsapp whatsapp